ElecGear M.2 2280 SSD Cooler, M11 Angle and Height Adjustable Heat Pipe + Solid Aluminum Heatsink with PWM Cooling Fan for 80mm PCIe NVMe and SATA SSD Internal Solid State Drive, Thermal Pads included

✔ Angle & Height Adjustable (Patent pending)
✔ Double Layers of Aluminum Heatsink
✔ U-shaped Heat Pipe in 6mm Diameter
✔ PWM controlled Fan at max 9300RPM
✔ Designed for M.2 SSD 2280 Form Factor
✔ Ready for Newest PCIe 4.0 Gen4 NVMe
✔ Thermal Paste and Pads are included

ElecGear M11 SSD Cooler is the ultimate cooling solution to 2280 M.2 SSD. Features two layers of aluminum heatsink connected by a U-shaped heat pipe. The patented angle adjustable structure makes it possible to adapt to various layout of mother board. A 30mm PWM cooling fan drives the heat away. High performance thermal pads deliver excellent heat dissipation. Expected 12 to 25 degrees Celsius drop to make sure your SSD will never be over-heated again

Brand: ElecGear
Model: M11
Material: Copper + Aluminum
Color: Grey
Angle Range: 145° (Max)
Working Voltage: DC12V
Working Current: 60mA (Max 90mA)
Fan Speed: 9300 RPM (Max)
Fan Dimension: 32 x 32 x 11mm
Cable Connector: 4Pin 2510 PWM controlled
Air Volume: 3.16CFM
Dimension: L80 x W33.5 x H52mm
Weight: >102g
Heat Pipe: φ6mm
Cable Length: 450mm

[Packaging]
1x ElecGear M11 SSD Cooler
1x Thermal Compound Paste (6.5W/m-k, 1gram)
8x Thermal Pads for Memory Chips (Pre-divided, Blue)
1x Thermal Pad for SSD Back Side (Single-sided, Pink)
1x Screwdriver

• [Heatsink with Heat Pipe] – Patent pending angle and height adjustable heatpipe connects two layers of aluminum heatsink decks. The heat produced by M.2 2280 SSD will be absorbed by the heat pipe and effectively conducted to both the upper and bottom heatsink. Wide 145° rotation range makes it possible to adapt to various layout of mother board. Suitable for PCIE 4.0 Gen4 NVMe in a gaming PC.
• [PWM Cooling Fan] – Equipped with a 30mm cooling fan connected to the fan control socket of the motoard. Low noise level at max rate 9300RPM rapidly cools down your SSD. Equipped with 4Pin 2510 connector fit most of PC. Please fine set the fan control strategy in the BIOS at a right balance between the temperature decrease and the noise level.
• [Thermal Paste and Pads] – 2 packs of thermal pads deliver high performance at 4.8W/m-k. The pre-divided small pads are for the main control IC and memory chips, while the big single-sided pad is to apply to the middle frame facing against the bottom of the SSD. Add the thermal paste to the bottom heat pipe for excellent heat dissipation. This quality paste is also suitable for CPU and GPU.
• [Compatibility Note] – The cooler s to cool down high performance 80mm SSD which produces huge heat in an extreme PC. The cooler is quite big which means it will not work with all PCs, though it comes with the innovative angle adjustable design. Please study the dimensioning on the picture and make sure your PC has enough space to house this kit.
• [What’s in Package] – 1x ElecGear M11 SSD Cooler with PWM Cooling Fan, 1x Thermal Compound Paste (6.5W/m-k, 1gram), 8x Thermal Pads for Memory Chips (Pre-divided Blue), 1x Thermal Pad for SSD Back Side (Single-sided Pink), 1x Screwdriver and Screws.